 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Vertical Cavity Surface Emitting Laser in TO-46 Package Features * * * * * * * * * Attenuated Optics 850 nm VCSEL technology High thermal stability Up to 1.25 Gbps Recommended for multimode fiber applications Microbead lens Pin out and attenuation options available on request Burned in for communication level reliability High optical coupling to MM fiber Description The OPV215 is a high performance 850nm VCSEL packaged for high speed communication links. OPV215 combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of optical power and about 30% optical attenuation for noise suppression. The OPV215Y is identical electrically and optically and differs only in pin out. Refer to mechanical drawings for details. This product's combination of features including high speed, high output power and concentric beam make it an ideal transmitter for integration into all types of data communications equipment. Applications include: Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Maximum Reverse Voltage Storage Temperature Operating Temperature Soldering Lead Temperature Max. Continuous Optical Power at 70 C 5 Volts -40 to +125 C -40 to +85 C 260 C for 10 Seconds 0.8 mW Fibre Channel Gigabit Ethernet ATM VSR (Very Short Reach) Intra-system links Optical backplane interconnects. Additional laser safety information can be found on the Optek website. See application #221. Classification is not marked on the device due to space limitations. See package outline for centerline of optical radiance. Operating devices beyond maximum rating may cause devices to exceed rated classification September 2003 Issue 3.2 Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com Page 1 of 4 OPV215, OPV215Y Technical Data Electrical/Optical Characteristics (at 25 C unless otherwise specified) SYMBOL POT ITH VF IR RS IRPD IM tr,tf NRI /T /T lTH/T VF/T PARAMETER Power Out Total Threshold Current Forward Voltage Reverse Current Series Resistance Slope Efficiency Reverse Current, photo diode Linearity Monitor Current Wavelength Optical Bandwidth Rise and Fall Time Relative Intensity Noise Temp Coefficient of Slope Efficiency Temp Coefficient of Wavelength Temp Coefficient of Threshold Current Temperature Coefficient for VF 200 -123 -40 0.06 1.5 -2.5 0.0 20 830 860 0.85 nm nm ps dB/Hz %/ C nm/ C mA mV/ C (0 - 70 C) 0 - 70 C 0 - 70 C 20% to 80% 14 0.10 30 MIN 0.7 2.0 TYP MAX 3.0 5.5 2.15 30 40 UNITS mW mA V nA ohms nA TEST CONDITION IF = 12 mA Note 1 IF = 12 mA VR = 5 V Note 2 VR = 5 V Note 4 IF = 12 mA, VR = 5 V NOTES: (1) Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 6 mA to 8 mA. Line 2 from 0 mA to 2 mA. (2) Series Resistance is the slope of the Voltage-Current line from 8 to 12 mA. (3) Slope efficiency, is the slope of the best fit LI line from 8 mA to 12 mA using no larger than .5 mA test interval points. (4) Using data points taken from slope efficiency, delta L/ delta I is calculated for each adjacent pair of 0.5mA points. The minimum is 0.0 ( no negative values allowed) Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com mW/mA Note 3 September 2003 Issue 3.2 www.optekinc.com Page 2 of 4 OPV215, OPV215Y Technical Data Output Power vs. Forward Current 1.4 1.2 Normalized Output Power (12mA, 25 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 Forward Current (mA) 6 7 8 9 10 11 12 13 14 Forward Voltage vs. Forward Current 2.2 0C 2.0 25 C Forward Voltage (V) 1.8 C 70 1.6 1.4 1.2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Forward Current (mA) Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com September 2003 Issue 3.2 www.optekinc.com Page 3 of 4 70 C 1.0 25 C 0 C | 15 15 OPV215, OPV215Y Technical Data Invisible Light emits from this surface 5.36 .211 3.94 3.30 .155 .130 4.75 4.65 .187 O .183 O .050 1.27 0.51 .020 12.70 3X .500 MIN 3X O 3X .018 2 (CASE) 2.54 0.44 .100 O 1) Tolerances are 0.005 unless otherwise specified 2) Dimensions in inches [mm] 1 BOTTOM VIEW 3 NOTES: 1. UNLESS OTHERWISE SPECI FIED ALL DIMENSIONS ARE .005. VCSEL PD OPV215 Pin 1 2 3 Connection VCSEL Anode VCSEL Cathode/PD Anode PD Cathode Pin 1 2 3 OPV215Y Connection VCSEL Cathode VCSEL Anode/PD Cathode PD Anode July 2002 OPV215, Rev. Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com September 2003 Issue 3.2 www.optekinc.com Page 4 of 4 (c) 1 2 3 ! ! (c) |
Price & Availability of OPV215
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |